|
Post by therebechips on Aug 7, 2007 17:42:44 GMT 7
I now have an N5200 Pro, and it works really well with my network of macs - most of the time. Changing access permissions on an existing folder or resizing the share folder limit can cause the share to disappear when using AFP - you simply cannot connect to it. And occasionally trying to delete large amounts of data in one go has the effect that the files in the share folder seem to dissapear when connected with AFP, which can be a real brown pants moment Luckily there is an easy fix for this if this happens to you: 1. Log in to the Thecus as admin and make sure CIFS/SMB is enabled (under Network > Services) 2. On your mac choose Go > Connect to server and type in cifs://[WAN host name] 3. Enter your username and password. You may get a message like "Username or password is incorrect". If this happens, go back to the Thecus admin and re-apply the ACL for the share, then try again. If that fails, make the share public, then try to connect again. 4. Once connected via cifs to your share, you should now open a Terminal window and type this command to show hidden files on your mac: defaults write com.apple.Finder AppleShowAllFiles YES 5. Relaunch Finder (option click on the icon in the dock and choose 'Relaunch') 5. Open your share and you will see a folder called .AppleDB. Delete this folder. Be careful not to delete anything else. 6. Back in the Terminal window hide hidden files with this command: defaults write com.apple.Finder AppleShowAllFiles No 7. Relaunch Finder as before. 8. Disconnect from the cifs share, and reconnect using afp://[WAN host name] Your share and files will all be there.
|
|
|
Post by therebechips on Aug 31, 2007 17:52:14 GMT 7
UPDATE: seems like AFP problems occur frequently if you set folder size limits. The Thecus doesn't keep an accurate count of file sizes in a folder and so often thinks space has been exceeded. This may also be true of CIFS.
Solution: don't use folder quotas! In the Thecus admin, create a new folder with 0 space (i.e. unlimited), set up identical ACL on the folder, then use FTP to move your all your files into it - then go back to the Thecus admin and delete the old folder. (Note that redefining the quota limit on an *existing* folder doesn't get saved between reboots - another bug).
|
|
glo8al
Junior Member
Posts: 95
|
Post by glo8al on Sept 1, 2007 17:34:08 GMT 7
Is this quota problem on firmware 2.00.01? or just the older firmwares? I stopped using AFP (way too slow) on the N5200 so all the Macs connect via SMB. My NasLiteV2.06 has AFP now which is faster than SMB, I don't know what the ppl at serverelements did to the AFP but it works a lot better than the N5200 version.
|
|
|
Post by speedtriple on Mar 7, 2009 23:19:13 GMT 7
Dear therebechips
I came tp this thread through a hint from peterfu and I', delighted to tell you that it works like a charm, thanks a lot, it saved me lots of trouble.
Kindest regards
SpeedTriple
|
|
|
Post by speedtriple on Oct 24, 2009 3:10:55 GMT 7
Hi After a power failure I was unable to access the shares on my N5200Pro from Mac OS X. Once more - it so happens after every power failure - I had to delete the folders called ".AppleDB" according to the instructions provided by "therebechips" - Thanks a lot to him once again. Unlike the previous times I was unable to delete this folder from one of the shares containing my mp3 collection. The system came back with the message that I had insufficient access rights. So I did a little search on the web, found several hints like repairing the access rights using the terminal an the command "sudo chown ...." and "sudo rm -rf ...." without any success. Now does anybody know of any other means to either successfully repair the access rights or remove the folder ".AppleDB". Thank you so much for your help Speedy
|
|